Menu
Your Cart

SpeedFit Fittings

Brand: John Guest Product Code: SF PEM221010W
Features:Push-fit and demountable connectionsSuitable for use with both hot and cold water systems as well as central heating systemsGrip and Seal connectionConstructed from lead-free and non-toxic materialsNo scale build-up and corrosion free designBSI and WRAS approvedSpecification:Product Type: ElbowsRange: SpeedFitSize: 10 x 10mm..
£3.60
Brand: John Guest Product Code: SF PEM0310W
Push-fit plastic fitting for the connection of plastic and copper pipe.Designed, manufactured and assembled in the UK by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.Note: With all plastic pipes the relevant manufacturer’s pipe insert is required. Features:Push-fit and demountable connectionsSuitable for hot and cold water systems as well as central heating systemsGrip and Seal connectionManufactured from lead-free and non-toxic materialsNo scale build-up and corrosion free designBSI and WRAS approvedSpecification:Product Type: ElbowsRange: SpeedFitSize: 10mm..
£2.90
Brand: John Guest Product Code: SF PEM0210W
Features:Push-fit and demountable connectionsSuitable for use with both hot and cold water systems as well as central heating systemsGrip and Seal connectionConstructed from lead-free and non-toxic materialsNo scale build-up and corrosion free designBSI and WRAS approvedSpecification:Product Type: Equal TeesRange: SpeedFitSize: 10mm..
£3.32
Brand: John Guest Product Code: SF STS10
These inserts are required to be used when connecting a Speedfit pipe to a Speedfit fitting. The 2 extra ‘O’ Rings provide enhanced sealing.Note: When connecting to a Compression fitting, standard TSM inserts must be used.Specification:Product Type: InsertsRange: SpeedFitSize: 10mm..
£0.36
Brand: John Guest Product Code: SF TSM10N
These inserts are required to be used when connecting a Speedfit pipe to a Speedfit fitting or connecting a Speedfit pipe to a compression fitting.Note: Inserts must be used on all Speedfit connections.Specification:Product Type: InsertsRange: SpeedFitSize: 10mm..
£0.34
Brand: John Guest Product Code: SF PEM0410W
Push-fit plastic fitting for the connection of plastic and copper pipe. Designed, manufactured and assembled in the UK by John Guest Speedfit.Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.Note: With all plastic pipes the relevant manufacturer’s pipe insert is required. Features:Push-fit and demountable connectionsSuitable for use within hot and cold water systems and central heating systemsGrip and Seal connectionConstructed with lead-free and non-toxic materialsNo scale build-up and corrosion free designBSI and WRAS approvedSpecification:Product Type: ConnectorsRange: SpeedFitSize: 10mm..
£2.34
Brand: John Guest Product Code: SF NPC10
Features:Push-fit and demountable connectionsSuitable for use with both hot and cold water systems as well as central heating systemsGrip and Seal connectionConstructed from lead-free and non-toxic materialsNo scale build-up and corrosion free designWRAS, BBA and IAB approvedSpecification:Product Type: Nail ClipsRange: SpeedFitSize: 10mm..
£0.22
Brand: John Guest Product Code: SF PSE4610W
Push-fit plastic fitting for the connection of plastic and copper pipe. Designed, manufactured and assembled in the UK by John Guest Speedfit.Simply push the stop end fitting fully onto the pipe up to the pipe stop. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release.The stop end fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.Note: With all plastic pipes the relevant manufacturer’s pipe insert is required. Features:Push-fit and demountable connectionsSuitable for use with both hot and cold water systems as well as central heating systemsGrip and Seal connectionManufactured from lead-free and non-toxic materialsDesigned to prevent limescale build-up and be corrosion freeBSI and WRAS approvedSpecification:Product Type: Stop EndsRange: SpeedFitSize: 10mm..
£2.28
Brand: John Guest Product Code: SF PSE3210W
Features:Push-fit and demountable connectionsSuitable for use with both hot and cold water systems as well as central heating systemsGrip and Seal connectionConstructed from lead-free and non-toxic materialsNo scale build-up and corrosion free designBSI and WRAS approvedSpecification:Product Type: ConnectorsRange: SpeedFitSize: 10mm x 1/2"..
£3.30
Brand: John Guest Product Code: SF PEM061510W
Features:Push-fit and demountable connectionsSuitable for use with both hot and cold water systems as well as central heating systemsGrip and Seal connectionConstructed from lead-free and non-toxic materialsNo scale build-up and corrosion free designBSI and WRAS approvedSpecification:Product Type: Fitting ReducersRange: SpeedFitSize: 15 x 10mm..
£2.00
Brand: John Guest Product Code: SF PEM211510W
Push-fit plastic fitting for the connection of plastic and copper pipe. Designed, manufactured and assembled in the UK by John Guest Speedfit.Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.Note: With all plastic pipes the relevant manufacturer’s pipe insert is required. Features:Push-fit and demountable connectionsSuitable for use within hot and cold water systems and central heating systemsGrip and Seal connectionConstructed with lead-free and non-toxic materialsNo scale build-up and corrosion free designBSI and WRAS approvedSpecification:Product Type: ElbowsRange: SpeedFitSize: 15 x 10mm..
£4.84
Brand: John Guest Product Code: SF PEM201510W
Push-fit plastic fitting for the connection of plastic and copper pipe. Designed, manufactured and assembled in the UK by John Guest Speedfit.Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.  The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.  Features:Push-fit and demountable connectionsSuitable for use with both hot and cold water systems as well as central heating systemsGrip and Seal connectionLead-free and non-toxic materialsNo scale build-up and corrosion free designBSI and WRAS approvedSpecification:Product Type: CouplersRange: SpeedFitSize: 15 x 10mm..
£4.08
Brand: John Guest Product Code: SF PEM3015AW
Features:Push-fit and demountable connectionsSuitable for use with both hot and cold water systems as well as central heating systemsGrip and Seal connectionConstructed from lead-free and non-toxic materialsNo scale build-up and corrosion free designBSI and WRAS approvedSpecification:Product Type: TeesRange: SpeedFitSize: 15 x 15 x 10mm..
£4.50
Brand: John Guest Product Code: SF PEM571515W
Features:Push-fit and demountable connectionsSuitable for use with both hot and cold water systems as well as central heating systemsGrip and Seal connectionConstructed from lead-free and non-toxic materialsNo scale build-up and corrosion free designBSI and WRAS approvedSpecification:Product Type: ElbowsRange: SpeedFitSize: 15 x 15mm..
£4.04
Brand: John Guest Product Code: SF PEM221515W
Features:Push-fit and demountable connectionsSuitable for use with both hot and cold water systems as well as central heating systemsGrip and Seal connectionConstructed from lead-free and non-toxic materialsNo scale build-up and corrosion free designBSI and WRAS approvedSpecification:Product Type: ElbowsRange: SpeedFitSize: 15 x 15mm..
£4.04
Brand: John Guest Product Code: SF CM2315W
Note: The 2-way divider is not suitable to be used in central heating systems.Specification:Product Type: DividersRange: SpeedFitSize: 15mm..
£4.92
Showing 1 to 16 of 58 (4 Pages)
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.