Plumbing

Specification:Product Type: Diaphragm WasherSize: 114 x 127mmMPN: PPW394Colour: WhiteWidth: 114mm..

Specification:Product Type: Tap TopMaterial: ChromeSize: 1/2"MPN: TC04Colour: WhiteConnection: ThreadedDiameter: 1/2"..

Specification:Product Type: Valve KitMaterial: VariousSize: MixedMPN: PPW356Colour: Silver..

Specification:Product Type: Top Hat WasherMaterial: PolytheneSize: 1/2"MPN: PPW35Colour: Silver..

Specification:Product Type: Pipe CollarMaterial: PlasticSize: 15mmMPN: PPS444Colour: BronzeDiameter: 15mm..

Specification:Product Type: Tap StopperSize: 32mmMPN: PPS14Colour: Bronze..

Specification:Product Type: Radiator CapMaterial: PlasticSize: 35 x 90 x 120mmMPN: PPF248Colour: BrassWidth: 90mmHeight: 120mm..

Specification:Product Type: Diaphragm WasherSize: 160 x 90mmMPN: PPW30Colour: Silver, GreenWidth: 90mm..

Specification:Product Type: Toilet FixingMaterial: PVCFinish: WhiteMPN: PPS42..

This radiator bleed key is a designed with a thin end to allow it to be used in the tightest of areas, perfect for use on radiators next to walls. The key is made of brass and is easy to grip to allow for the user to use it comfortably.Features:Made from brassThin designEasy to gripSpecification:Product Type: Bleed KeysMaterial: Solid Brass..

Features:Push-fit and demountable connectionsSuitable for use with both hot and cold water systems as well as central heating systemsGrip and Seal connectionConstructed from lead-free and non-toxic materialsNo scale build-up and corrosion free designBSI and WRAS approvedSpecification:Product Type: ElbowsRange: SpeedFitSize: 10 x 10mm..

Push-fit plastic fitting for the connection of plastic and copper pipe.Designed, manufactured and assembled in the UK by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.Note: With all plastic pipes the relevant manufacturer’s pipe insert is required. Features:Push-fit and demountable connectionsSuitable for hot and cold water systems as well as central heating systemsGrip and Seal connectionManufactured from lead-free and non-toxic materialsNo scale build-up and corrosion free designBSI and WRAS approvedSpecification:Product Type: ElbowsRange: SpeedFitSize: 10mm..

Features:Push-fit and demountable connectionsSuitable for use with both hot and cold water systems as well as central heating systemsGrip and Seal connectionConstructed from lead-free and non-toxic materialsNo scale build-up and corrosion free designBSI and WRAS approvedSpecification:Product Type: Equal TeesRange: SpeedFitSize: 10mm..

These inserts are required to be used when connecting a Speedfit pipe to a Speedfit fitting. The 2 extra ‘O’ Rings provide enhanced sealing.Note: When connecting to a Compression fitting, standard TSM inserts must be used.Specification:Product Type: InsertsRange: SpeedFitSize: 10mm..

These inserts are required to be used when connecting a Speedfit pipe to a Speedfit fitting or connecting a Speedfit pipe to a compression fitting.Note: Inserts must be used on all Speedfit connections.Specification:Product Type: InsertsRange: SpeedFitSize: 10mm..

Push-fit plastic fitting for the connection of plastic and copper pipe. Designed, manufactured and assembled in the UK by John Guest Speedfit.Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.Note: With all plastic pipes the relevant manufacturer’s pipe insert is required. Features:Push-fit and demountable connectionsSuitable for use within hot and cold water systems and central heating systemsGrip and Seal connectionConstructed with lead-free and non-toxic materialsNo scale build-up and corrosion free designBSI and WRAS approvedSpecification:Product Type: ConnectorsRange: SpeedFitSize: 10mm..

Features:Push-fit and demountable connectionsSuitable for use with both hot and cold water systems as well as central heating systemsGrip and Seal connectionConstructed from lead-free and non-toxic materialsNo scale build-up and corrosion free designWRAS, BBA and IAB approvedSpecification:Product Type: Nail ClipsRange: SpeedFitSize: 10mm..

Push-fit plastic fitting for the connection of plastic and copper pipe. Designed, manufactured and assembled in the UK by John Guest Speedfit.Simply push the stop end fitting fully onto the pipe up to the pipe stop. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release.The stop end fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.Note: With all plastic pipes the relevant manufacturer’s pipe insert is required. Features:Push-fit and demountable connectionsSuitable for use with both hot and cold water systems as well as central heating systemsGrip and Seal connectionManufactured from lead-free and non-toxic materialsDesigned to prevent limescale build-up and be corrosion freeBSI and WRAS approvedSpecification:Product Type: Stop EndsRange: SpeedFitSize: 10mm..